Environment_Infrastructure/setup/08-prod-db-cluster-kurulum.md

# 08 - Prod DB Cluster Setup (Swarm)

The purpose of this phase is to add the three DB nodes to Docker Swarm as workers and configure the MongoDB replica set and the PostgreSQL high-availability setup managed with Patroni + etcd.

`07-prod-ansible-bootstrap.md` must be completed on all DB nodes.

## Architecture

```
iklim-app-01/02/03  (Swarm manager'lar, 10.20.10.11/12/13)
        |
        |-- iklimco-net (overlay)
        |
iklim-db-01  (Swarm worker, 10.20.20.11)
    mongodb-01   [rs0 member 0 — preferred primary]
    etcd-01      [etcd cluster member]
    patroni-01   [Patroni + PostgreSQL — first primary candidate]

iklim-db-02  (Swarm worker, 10.20.20.12)
    mongodb-02   [rs0 member 1]
    etcd-02      [etcd cluster member]
    patroni-02   [Patroni + PostgreSQL — standby]

iklim-db-03  (Swarm worker, 10.20.20.13)
    mongodb-03   [rs0 member 2]
    etcd-03      [etcd cluster member]
    patroni-03   [Patroni + PostgreSQL — standby]
```

DB containers discover each other through **overlay DNS aliases** (`mongodb-01`, `etcd-01`, `patroni-01`, etc.) on the shared `iklimco-net` overlay network. Each service publishes its port in `host` mode so replication traffic goes directly through the Hetzner private network while the overlay DNS resolves service names correctly. All containers are defined in the single `docker-stack-db.prod.yml` stack file at the repo root.

## 1. Firewall Update

Verify that the following rules exist in `terraform/hetzner/prod/firewall.tf`; if any are missing, add them and run `terraform apply`.

Inside `hcloud_firewall.app`, from the DB subnet to Swarm ports:

```hcl
rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "2377"
  source_ips  = [local.db_subnet_cidr]
  description = "Docker Swarm control plane from DB subnet"
}

rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "7946"
  source_ips  = [local.db_subnet_cidr]
  description = "Docker Swarm node discovery (TCP) from DB subnet"
}

rule {
  direction   = "in"
  protocol    = "udp"
  port        = "7946"
  source_ips  = [local.db_subnet_cidr]
  description = "Docker Swarm node discovery (UDP) from DB subnet"
}

rule {
  direction   = "in"
  protocol    = "udp"
  port        = "4789"
  source_ips  = [local.db_subnet_cidr]
  description = "Docker Swarm VXLAN overlay from DB subnet"
}
```

Inside `hcloud_firewall.db`, from the app subnet to Swarm ports + overlay, and etcd/Patroni traffic inside the DB subnet:

```hcl
rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "2377"
  source_ips  = [local.app_subnet_cidr]
  description = "Docker Swarm control plane from app subnet"
}

rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "7946"
  source_ips  = [local.app_subnet_cidr]
  description = "Docker Swarm node discovery (TCP) from app subnet"
}

rule {
  direction   = "in"
  protocol    = "udp"
  port        = "7946"
  source_ips  = [local.app_subnet_cidr]
  description = "Docker Swarm node discovery (UDP) from app subnet"
}

rule {
  direction   = "in"
  protocol    = "udp"
  port        = "4789"
  source_ips  = [local.app_subnet_cidr]
  description = "Docker Swarm VXLAN overlay from app subnet"
}

rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "2379"
  source_ips  = [local.db_subnet_cidr]
  description = "etcd client port within DB subnet"
}

rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "2379"
  source_ips  = [local.app_subnet_cidr]
  description = "etcd client port from app subnet (APISIX connects to Patroni etcd)"
}

rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "2380"
  source_ips  = [local.db_subnet_cidr]
  description = "etcd peer port within DB subnet"
}

rule {
  direction   = "in"
  protocol    = "tcp"
  port        = "8008"
  source_ips  = [local.db_subnet_cidr]
  description = "Patroni REST API within DB subnet"
}
```

```bash
cd terraform/hetzner/prod
terraform plan
terraform apply
```

## 2. Add DB Nodes to Swarm

**Swarm manager'lardan birinde** (iklim-app-01) join token al:

```bash
docker swarm join-token worker
```

**Her DB node'unda** (iklim-db-01, iklim-db-02, iklim-db-03):

```bash
docker swarm join --token <TOKEN> 10.20.10.11:2377
```

Label the nodes **on iklim-app-01**:

```bash
docker node update --label-add role=db --label-add db-index=01 iklim-db-01
docker node update --label-add role=db --label-add db-index=02 iklim-db-02
docker node update --label-add role=db --label-add db-index=03 iklim-db-03

docker node ls
```

## 3. StorageBox Directory Structure

DB data and logs are stored on **local Docker named volumes** (performance, WAL/compaction requirements). Only config files are placed on StorageBox. On each DB node, where `/mnt/storagebox` must already be mounted:

```bash
# On iklim-db-01:
mkdir -p /mnt/storagebox/db/mongodb-01/config
mkdir -p /mnt/storagebox/db/postgresql-01/config

# On iklim-db-02:
mkdir -p /mnt/storagebox/db/mongodb-02/config
mkdir -p /mnt/storagebox/db/postgresql-02/config

# On iklim-db-03:
mkdir -p /mnt/storagebox/db/mongodb-03/config
mkdir -p /mnt/storagebox/db/postgresql-03/config
```

Config files (`mongod.conf`, `patroni.yml`) are deployed by the Ansible `db_stack` role into these directories. Named Docker volumes (`mongodb-01-data`, `etcd-01-data`, `postgresql-01-data`, etc.) are created automatically by the stack deploy.

## 4. MongoDB Replica Set

### mongod.conf

Her DB node'unda `/mnt/storagebox/db/mongodb-0X/config/mongod.conf` (Ansible `db_stack` rolü tarafından deploy edilir):

```yaml
net:
  port: 27017
storage:
  engine: "wiredTiger"
  dbPath: "/data/db"
  directoryPerDB: true
systemLog:
  verbosity: 0
  timeStampFormat: "iso8601-local"
  destination: file
  path: "/data/log/mongo.log"
  logAppend: true
  logRotate: rename
replication:
  replSetName: "rs0"
security:
  authorization: enabled
  keyFile: "/data/configdb/rs-auth.key"
```

### Replica Set Auth Key

The **same** key file must exist on all DB nodes:

```bash
# Create on iklim-db-01:
openssl rand -base64 756 > /mnt/storagebox/db/mongodb-01/config/rs-auth.key
chmod 400 /mnt/storagebox/db/mongodb-01/config/rs-auth.key

# Copy the same content to the other nodes:
cat /mnt/storagebox/db/mongodb-01/config/rs-auth.key \
  > /mnt/storagebox/db/mongodb-02/config/rs-auth.key
cat /mnt/storagebox/db/mongodb-01/config/rs-auth.key \
  > /mnt/storagebox/db/mongodb-03/config/rs-auth.key

chmod 400 /mnt/storagebox/db/mongodb-0{2,3}/config/rs-auth.key
```

### Stack File — MongoDB

MongoDB services are defined in `docker-stack-db.prod.yml` (repo root). Each service uses a named Docker volume for data and log, and a StorageBox bind mount for config:

```yaml
mongodb-01:
  image: mongo:8.3.2
  volumes:
    - mongodb-01-data:/data/db
    - mongodb-01-log:/data/log
    - /mnt/storagebox/db/mongodb-01/config:/data/configdb
  networks:
    iklimco-net:
      aliases:
        - mongodb-01
  ports:
    - target: 27017
      published: 27017
      protocol: tcp
      mode: host
  deploy:
    replicas: 1
    placement:
      max_replicas_per_node: 1
      constraints:
        - node.hostname == iklim-db-01
```

Volumes `mongodb-01-data`, `mongodb-01-log`, etc. are declared at the bottom of `docker-stack-db.prod.yml` and are created automatically on first deploy.

### Replica Set Initialization

Run **once** after the stack is deployed:

```bash
# On iklim-app-01 (overlay network erişimi için):
docker run --rm -it --network iklimco-net mongo:8.3.2 \
  mongosh "mongodb://mongo-root:${DATABASE_MONGODB_ROOT_PASSWD}@mongodb-01/admin"

# Inside mongosh:
rs.initiate({
  _id: "rs0",
  members: [
    { _id: 0, host: "mongodb-01:27017", priority: 2 },
    { _id: 1, host: "mongodb-02:27017", priority: 1 },
    { _id: 2, host: "mongodb-03:27017", priority: 1 }
  ]
})

# Status check:
rs.status()
```

The replica set is ready when `"stateStr": "PRIMARY"` and two `"SECONDARY"` entries are visible.

## 5. PostgreSQL — Patroni + etcd

Patroni coordinates PostgreSQL primary/standby roles through etcd. If the primary goes down, one of the other nodes automatically wins the election and becomes primary. The Swarm service restarts the container; Patroni continues from where it left off.

### 5.1 Custom Image (Patroni + PostGIS)

Patroni is installed on top of the `postgis/postgis:18-3.6` image. This image is pushed to Harbor and used in the stack.

`build/patroni-postgis/Dockerfile`:

```dockerfile
FROM postgis/postgis:18-3.6

USER root

RUN apt-get update && apt-get install -y --no-install-recommends \
    python3-pip \
    python3-dev \
    gcc \
    libpq-dev \
    && pip3 install --no-cache-dir 'patroni[etcd3]' \
    && apt-get purge -y gcc python3-dev \
    && apt-get autoremove -y \
    && rm -rf /var/lib/apt/lists/*

USER postgres

ENTRYPOINT ["patroni", "/etc/patroni/patroni.yml"]
```

Build and push is done with `ops/push-harbor-custom-images.sh`:

```bash
cd /path/to/repo
bash ops/push-harbor-custom-images.sh
```

Or manually:

```bash
cd build/patroni-postgis
docker build -t registry.tarla.io/iklimco/custom-patroni-postgis:18-3.6 .
echo "$HARBOR_CI_TOKEN" | docker login registry.tarla.io -u robot-ci-push-iklimco --password-stdin
docker push registry.tarla.io/iklimco/custom-patroni-postgis:18-3.6
```

### 5.2 etcd Cluster

etcd services are defined in `docker-stack-db.prod.yml`. Each service uses a named Docker volume for data and has an overlay DNS alias. Environment variables reference peer URLs by alias, not by hardcoded IP:

```yaml
etcd-01:
  image: bitnami/etcd:3
  environment:
    ALLOW_NONE_AUTHENTICATION: "yes"
    ETCD_NAME: etcd-01
    ETCD_INITIAL_ADVERTISE_PEER_URLS: http://etcd-01:2380
    ETCD_LISTEN_PEER_URLS: http://0.0.0.0:2380
    ETCD_ADVERTISE_CLIENT_URLS: http://etcd-01:2379
    ETCD_LISTEN_CLIENT_URLS: http://0.0.0.0:2379
    ETCD_INITIAL_CLUSTER: "etcd-01=http://etcd-01:2380,etcd-02=http://etcd-02:2380,etcd-03=http://etcd-03:2380"
    ETCD_INITIAL_CLUSTER_STATE: new
    ETCD_INITIAL_CLUSTER_TOKEN: iklimco-etcd-prod
  volumes:
    - etcd-01-data:/bitnami/etcd/data
  networks:
    iklimco-net:
      aliases:
        - etcd-01
  deploy:
    replicas: 1
    placement:
      max_replicas_per_node: 1
      constraints:
        - node.hostname == iklim-db-01
```

**APISIX etcd usage:** In prod, APISIX shares this etcd cluster with the `/apisix` prefix. Patroni uses the `/service/` prefix and APISIX uses the `/apisix/` prefix — no collision. The overlay DNS names (`etcd-01:2379`, `etcd-02:2379`, `etcd-03:2379`) are reachable from app nodes via the `iklimco-net` overlay. Therefore, the app subnet → DB nodes port 2379 firewall rule is mandatory; it was added in Section 1.

**Important:** `ETCD_INITIAL_CLUSTER_STATE` must be `new` on the first deploy and `existing` on all later deploys. The deploy steps in Section 6 detect this automatically; no manual update is required.

### 5.3 Patroni Configuration

`patroni.yml` is generated per-node by the Ansible `db_stack` role from `templates/patroni.yml.j2` using `inventory_hostname` (e.g., `iklim-db-01`). The generated file uses overlay DNS aliases for all addresses.

**Generated output — Node 01** (`/mnt/storagebox/db/postgresql-01/config/patroni.yml`):

```yaml
scope: iklim-postgres
namespace: /db/
name: postgresql-01

restapi:
  listen: 0.0.0.0:8008
  connect_address: patroni-01:8008

etcd3:
  hosts:
    - etcd-01:2379
    - etcd-02:2379
    - etcd-03:2379

bootstrap:
  dcs:
    ttl: 30
    loop_wait: 10
    retry_timeout: 10
    maximum_lag_on_failover: 1048576
    postgresql:
      use_pg_rewind: true
      parameters:
        wal_level: replica
        hot_standby: "on"
        wal_keep_size: 512
        max_wal_senders: 5
        max_replication_slots: 5
        shared_preload_libraries: 'pg_stat_statements'
        pg_stat_statements.track: 'all'

  initdb:
    - encoding: UTF8
    - data-checksums

  pg_hba:
    - host replication replicator 10.20.20.0/24 scram-sha-256
    - host all all 10.20.10.0/24 scram-sha-256
    - host all all 10.20.20.0/24 scram-sha-256

  users:
    postgres:
      password: "${DATABASE_POSTGRES_ROOT_PASSWD}"
      options:
        - superuser

postgresql:
  listen: 0.0.0.0:5432
  connect_address: patroni-01:5432
  data_dir: /var/lib/postgresql/data/pgdata
  pgpass: /tmp/pgpass0
  authentication:
    replication:
      username: replicator
      password: "${DATABASE_POSTGRES_REPLICATOR_PASSWORD}"
    superuser:
      username: postgres
      password: "${DATABASE_POSTGRES_ROOT_PASSWD}"
  parameters:
    unix_socket_directories: "/var/run/postgresql"

tags:
  nofailover: false
  noloadbalance: false
  clonefrom: false
  nosync: false
```

For Node 02 and 03, only `name`, `restapi.connect_address`, and `postgresql.connect_address` differ (`postgresql-02`/`patroni-02:8008`/`patroni-02:5432`, etc.).

### 5.4 Stack File — Patroni

Patroni services are defined in `docker-stack-db.prod.yml`. Each service uses the custom image, a named Docker volume for data, a StorageBox bind mount for the config file, and overlay DNS aliases:

```yaml
patroni-01:
  image: registry.tarla.io/iklimco/custom-patroni-postgis:18-3.6
  environment:
    DATABASE_POSTGRES_ROOT_PASSWD: "${DATABASE_POSTGRES_ROOT_PASSWD}"
    DATABASE_POSTGRES_REPLICATOR_PASSWORD: "${DATABASE_POSTGRES_REPLICATOR_PASSWORD}"
    TZ: "Europe/Istanbul"
  volumes:
    - postgresql-01-data:/var/lib/postgresql/data
    - /mnt/storagebox/db/postgresql-01/config/patroni.yml:/etc/patroni/patroni.yml:ro
  networks:
    iklimco-net:
      aliases:
        - patroni-01
  ports:
    - target: 5432
      published: 5432
      protocol: tcp
      mode: host
    - target: 8008
      published: 8008
      protocol: tcp
      mode: host
  deploy:
    replicas: 1
    placement:
      max_replicas_per_node: 1
      constraints:
        - node.hostname == iklim-db-01
```

Volumes `postgresql-01-data`, `postgresql-02-data`, `postgresql-03-data` are declared at the bottom of `docker-stack-db.prod.yml` and created automatically on first deploy.

### 5.5 Status Check

```bash
# On iklim-app-01 — Patroni cluster status:
docker exec -it $(docker ps -q -f name=iklim-db_patroni-01 | head -1) \
  patronictl -c /etc/patroni/patroni.yml list
```

Expected output: one `Leader` row and two `Replica` rows, all with the `State` column set to `running`.

```bash
# etcd cluster health (from app node via overlay):
docker run --rm --network iklimco-net alpine \
  sh -c "wget -qO- http://etcd-01:2379/health && \
         wget -qO- http://etcd-02:2379/health && \
         wget -qO- http://etcd-03:2379/health"
```

```bash
# Find the current primary:
docker exec -it $(docker ps -q -f name=iklim-db_patroni-01 | head -1) \
  patronictl -c /etc/patroni/patroni.yml topology
```

## 6. Deploy

All DB services (etcd, MongoDB, Patroni) are in the single `docker-stack-db.prod.yml` stack. Deploy from `iklim-app-01` in the repo working directory.

### .env File

DB stack password variables (`DATABASE_POSTGRES_ROOT_PASSWD`, `DATABASE_POSTGRES_REPLICATOR_PASSWORD`, `DATABASE_MONGODB_ROOT_PASSWD`) are stored in `prod/secrets/iklim.co/.env.secrets.shared` on StorageBox. Fetch it to `iklim-app-01` before deploy:

```bash
scp -P 23 STORAGEBOX_USER@STORAGEBOX_USER.your-storagebox.de:prod/secrets/iklim.co/.env.secrets.shared \
  /tmp/.env.secrets.shared
chmod 600 /tmp/.env.secrets.shared
```

### Deploy Steps

```bash
# On iklim-app-01, in the repo working directory:
set -a; . /tmp/.env.secrets.shared; set +a

# Automatic ETCD_INITIAL_CLUSTER_STATE detection:
DEPLOY_FILE="docker-stack-db.prod.yml"
if docker service ls --filter name=iklim-db_etcd-01 -q 2>/dev/null | grep -q .; then
  echo "ℹ️ etcd services mevcut, 'existing' ile deploy ediliyor..."
  DEPLOY_FILE=$(mktemp /tmp/docker-stack-db.XXXXXX.yml)
  sed "s/ETCD_INITIAL_CLUSTER_STATE: new/ETCD_INITIAL_CLUSTER_STATE: existing/g" \
    docker-stack-db.prod.yml > "$DEPLOY_FILE"
else
  echo "ℹ️ İlk deploy, 'new' state kullanılıyor..."
fi

docker stack deploy \
  --with-registry-auth \
  -c "$DEPLOY_FILE" \
  iklim-db

[ "$DEPLOY_FILE" != "docker-stack-db.prod.yml" ] && rm -f "$DEPLOY_FILE"

# Wait for etcd cluster to be ready:
echo "⏳ etcd bekleniyor..."
for i in $(seq 1 18); do
  if docker run --rm --network iklimco-net alpine \
      sh -c "wget -qO- http://etcd-01:2379/health 2>/dev/null | grep -q '\"health\":\"true\"'"; then
    echo "✅ etcd ready"
    break
  fi
  [ "$i" -eq 18 ] && echo "❌ etcd timeout" && exit 1
  echo "  attempt $i/18 — 10s bekleniyor..."
  sleep 10
done

docker stack services iklim-db
```

### DB Node Placement Check

```bash
docker service ps iklim-db_etcd-01
docker service ps iklim-db_mongodb-01
docker service ps iklim-db_patroni-01
```

All tasks must run on the expected `iklim-db-*` nodes.

### MongoDB Replica Set Initialization

Run once after the stack is deployed:

```bash
# From iklim-app-01 via overlay network:
docker run --rm -it --network iklimco-net mongo:8.3.2 \
  mongosh "mongodb://mongo-root:${DATABASE_MONGODB_ROOT_PASSWD}@mongodb-01/admin"

# Inside mongosh:
rs.initiate({
  _id: "rs0",
  members: [
    { _id: 0, host: "mongodb-01:27017", priority: 2 },
    { _id: 1, host: "mongodb-02:27017", priority: 1 },
    { _id: 2, host: "mongodb-03:27017", priority: 1 }
  ]
})
```

## 7. Access from App Services

App containers connect to DB services through the `iklimco-net` overlay network by **overlay DNS name**. Because the `iklim-db` stack shares the `iklimco-net` external network, service names and aliases are resolved through overlay DNS.

### MongoDB Replica Set Connection String

Variables in `env-prod/.env`:

```bash
DATABASE_MONGODB_HOST=mongodb-01:27017,mongodb-02:27017,mongodb-03:27017
DATABASE_MONGODB_PARAMS=replicaSet=rs0&readPreference=secondaryPreferred&authSource=admin
```

Microservice URI through overlay DNS:
```
mongodb://<user>:<password>@mongodb-01:27017,mongodb-02:27017,mongodb-03:27017/<db>?replicaSet=rs0&readPreference=secondaryPreferred&authSource=admin
```

> For direct testing, from outside the overlay with private IP:
> `mongodb://mongo-root:<PASSWORD>@10.20.20.11:27017,10.20.20.12:27017,10.20.20.13:27017/admin?replicaSet=rs0&authSource=admin`

### PostgreSQL — Patroni

Variables in `env-prod/.env`:

```bash
DATABASE_POSTGRES_HOST=patroni-01:5432,patroni-02:5432,patroni-03:5432
DATABASE_POSTGRES_PARAMS=targetServerType=preferSecondary&loadBalanceHosts=true
```

Patroni manages whichever node is primary at any moment. The JDBC/libpq driver automatically selects primary/secondary through the `targetServerType` parameter in the multi-host list:

```
# Write — goes to primary (libpq URI):
postgresql://<user>@patroni-01:5432,patroni-02:5432,patroni-03:5432/<db>?targetServerType=primary

# Read (load balancing):
postgresql://<user>@patroni-01:5432,patroni-02:5432,patroni-03:5432/<db>?targetServerType=preferSecondary&loadBalanceHosts=true
```

> For direct testing, from outside the overlay with private IP:
> `postgresql://postgres@10.20.20.11:5432,10.20.20.12:5432,10.20.20.13:5432/postgres?targetServerType=primary`

### Patroni REST API

Patroni exposes an HTTP endpoint on port 8008. This endpoint can be used with HAProxy or a similar load balancer to route to the primary automatically:

```bash
# Primary check (HTTP 200 = primary, HTTP 503 = replica):
curl -s http://patroni-01:8008/primary
```

## 8. Geliştirici ve Ofis Erişimi (Production)

Prod cluster yapısında `pg-proxy` veya `mongo-proxy` **kullanılmaz**. Ofis bilgisayarından erişim için doğrudan DB subnet'i hedef alınır.

### WireGuard Ayarı
Ofis bilgisayarındaki `.conf` dosyasında `AllowedIPs` güncellenmelidir:
`AllowedIPs = 10.8.0.1/32, 10.20.20.0/24`

### Bağlantı Parametreleri (Multi-Host)
Modern veritabanı araçları (DBeaver, Compass vb.) küme farkındalıklı bağlantı kurmalıdır:

| Veritabanı | Host Listesi | Port | Kritik Parametre |
| :--- | :--- | :--- | :--- |
| **PostgreSQL** | `10.20.20.11, 10.20.20.12, 10.20.20.13` | `5432` | `targetServerType=primary` |
| **MongoDB** | `10.20.20.11, 10.20.20.12, 10.20.20.13` | `27017` | `replicaSet=rs0` |

## Acceptance Criteria

- `docker stack services iklim-db` — 9 services visible (etcd-01/02/03, mongodb-01/02/03, patroni-01/02/03), all `1/1`
- `docker service ps iklim-db_patroni-01/02/03` — each task runs on its expected `iklim-db-*` node
- `docker service ps iklim-db_mongodb-01/02/03` — each task runs on its expected `iklim-db-*` node
- `docker service ps iklim-db_etcd-01/02/03` — each task runs on its expected `iklim-db-*` node
- `patronictl list` — 1 `Leader`, 2 `Replica`, all `running`
- etcd health endpoint returns `"health":"true"` on all three nodes via overlay
- `rs.status()` — 1 PRIMARY, 2 SECONDARY
- MongoDB and PostgreSQL are reachable from app nodes.
- Ports `5432`, `27017`, `2379`, `2380`, and `8008` are closed from the public internet.
- When a DB node is restarted, Patroni performs automatic election and a new primary is selected.
- During Patroni primary transition, the old primary rejoins as standby; there is no split-brain.